Ways to sew on badges manually or by machine

If you want to spice up a garment, accessory, luggage piece or even hats you could sew on badges to obtain the fresh look easily. Badges or patches when placed strategically can immediately change the look of a garment or accessory and take it from boring to spunky in just a few minutes. If you have children and they keep earning badges of merit http://dogbadge.com you wish to sew them on. However, as intimidating as it might sound, sewing on badges is quite easy when you know how to do it.

To begin this approach to sewing on a badge, start by placing the badge on the place that you desire it. Now secure the badge well with pins in order that it stays in place and doesn’t shift when you are sewing it on. So if you are putting the patch on a garment, you have to fix the patch after which try the garment on to make sure that the patch or the badge looks suitable in the place. If the patch requires a little readjustment you can do it at this stage easily.

Now thread the needle making sure that the thread you are using isn’t very long. Keep your thread on a length of approximately 18inches for easy maneuvering. If your thread is too long then you might get bothered by knots. When you have the thread ready create a knot at the end of the thread. You can actually thread a needle by hand by holding the non knotted end in between your forefinger and thumb and then passing it through the eye of your needle. It’s also possible to consider the assistance of a needle threader if you find threading a needle in such a manner difficult.

Pass the needle in the badge as well as the fabric being sure that the knot is on the wrong side of the patch. Leave a space of 1/8th of an inch from where you commenced stitching keeping this distance from your last stitch all the time. Continue stitching around the entire perimeter of the badge until you have completed stitching it all the way through. Now knot the thread on the underside of the patch by looping your thread using a single stitch. Pull the thread firmly to secure the knot after which cut off any excess thread which is left. Lastly remove the extra safety pins that you were using to secure the patch in position.

You can also sew on badges through the help of a sewing machine if you don’t wish to do the same manually. Choose a thread that matched the color of your patch after which you can tread your machine. You may as well pick a contrasting color depending on the look that you want to provide your badge. Once this is done you ought to start sewing you badge. Take advantage of the surface of the badge for your starting place and sew all along the edge of your badge making use of the regular stitch mode ending at your kick off point. Once done, cut the extra thread that connects the badge to the machine and your garment is ready to be used together with the badge.